+44 (0)161 339 3049

The waste heat recovery specialists

Case Study: ESP System – Alfreton


An Electrostatic Precipitator is an extremely energy efficient abatement solution for oily smoke fumes using only 30 watts/1000m3/hour, compared to an incinerator at 3KW/1000m3/hr.
The oily smoke fumes came from textile Stenters operating at 150 degrees, ESP’s have an operating temperature of 40/50 degrees and hence the opportunity for heat recovery occurred.
The hot water generated was used in the dye house thus reducing the boiler house steam load and giving an excellent return on investment.

Case Study 79
Capital Cost £310K
Payback 62 Months
Similar posts
  • ThermTech offers 10 year warranty on ... As a leading designer and manufacturer of waste heat recovery and gas cleansing systems, ThermTech has over 25 years’ experience in reducing operational costs and emissions for a wide range of industrial and commercial customers. Now, for additional peace of mind, the company is offering a 10 year warranty that will ensure continued reliability and [...]
  • Improving the efficiency of existing ... Oil and gas-fired boilers have been providing the heating requirements for many industrial and commercial premises for over 100 years. In that time the energy efficiency of these installations has increased steadily, however there is a way to significantly reduce energy consumption that is still not universally applied and yet has a typical payback period [...]
  • Case Study: Economiser – Liverp... ThermTech were asked to design, manufacture, and supply & install two replacement economisers for the hospitals waste heat steel boiler. The economisers will together exchange 449 kw of heat ant thereby heat 4,600 KGH of DFW from 85°C to 168°C. Based on performance of other similar economisers that we have installed over the years the [...]
  • Case Study: Engine Heat Recovery Anti... Heat recovery unit installed on the exhaust of a 2 MW heavy fuel oil fired Mirlees V16 engine which provided the main power supply to Antigua. [...]
  • Case Study: Diesel Engine Heat Recove... Diesel engine heat recovery – Deephams STW Running on light diesel oil the heat recovery units provided low pressure hot water for use in the digester plants on the sewage works. Having downward exhaust gas flow with an external by-pass duct allowed the units to have an automatic off line caustic wash facility to remove [...]
Translate »